download here:
http://www.mini0806.com/firmware/0806firmware-150128.zip

update log:
1, change default setting GPS STAMPING = LOG ONLY
2, correct the MPH value, which was KMH value when set the SPEED STAMPING to MPH
3, update text DRIVER NUMBER STAMP to DRIVER NUMBER STAMPING
4, auto switch GPS STAMPING to LOG ONLY when user set the STAMPING to KMH or MPH, if the GPS STAMPING was OFF
4, improve the codes for GPS icon showing delay. (this need to be wide tested.)

Any result or suggestion will be appericated.
 


Comments

02/06/2015 9:39am

I don’t know if you can help me or not. I purchased the mini0806 from you. I don’t know where to go for help. The mini0806.com web site only gives me another copy of the owner manual that doesn’t help. I can’t seem to get the gps to work. It is set for green light when gps is on, but no help. Can’t get mph or location to show on the video on playback.
I did update the film ware but no help.

Where do I find help for this?

Reply
Bill
02/06/2015 8:58pm

You need to set the GPS Stamping to ON and set Speed Stamping to MPH. Make sure the Camera is in the base and you supply power to the base. After turning it on, watch for the blinking green LED. When it stops blinking, the GPS has established a fix. It can take anywhere from 30 seconds to 8 minutes for it to stop blinking.

Do a search on the web for RegistratorViewer.exe. That will display the log files and map data.

Reply
Clyde
02/07/2015 5:26am

Did all that and can not get the green light to flash at all

Reply
Nickolay
02/08/2015 12:53am

Hello, my friend. Bought a on Ebay http://stores.ebay.com/jingjiniaostore?_trksid=p2047675.l2563#&panel1-1.
Very poor quality of filmed video. What advice give?

Reply
macca
02/11/2015 2:26am

ideally the firmware.bin file should be deleted by the unit after the firmware update is complete. at the moment you still have to reconnect the unit to a pc just to delete the .bin file after the firmware is updated (otherwise it continues in an endless 'do you want to update firmware' loop on each bootup).

ability to retain existing user settings before the firmware update, re-applying these user settings (otherwise you have to go through each previous change and reapply at the present time).

Reply
CD
02/12/2015 7:37am

Hello, I have bought 4 of your mini 0806, One the GPS has just stopped working altogether,
What can i do to get the GPS working again? It worked for all of about 5 minutes then the green light and the GPS logo went off and will not come back on again, touch wood that the other 3 continue to work, I have tried to update 2 of my cameras with the latest firmware to correct the GPS speed stamping and every time it says firmware update failed please advise,
I hope i have not wasted my money on your cameras as they certainly are not cheap.

Reply
CD
02/13/2015 12:07pm

I managed to get the firmware to update, by using another adapter to write firmware from PC to card. BUT the GPS will still not work on one of the cameras. Please any help on this issue, as it seems i may not be the only one to suffer this problem. Reading Clydes post seems he is having the same

Reply
jennifer
03/12/2015 4:35am

gps wire inside camera would have broken off. it is a known fault. many of the cameras from first and 2nd batch will not get gps light to stay on or record speed. it is a big problem.

CD
02/13/2015 12:08pm

I managed to get the firmware to update, by using another adapter to write firmware from PC to card. BUT the GPS will still not work on one of the cameras. Please any help on this issue, as it seems i may not be the only one to suffer this problem. Reading Clyde's post seems he is having the same

Reply
macca
02/12/2015 10:17pm

there's an issue with the audio since the AV-OUT addition, if I have this either ON or OFF (and reboot after applying) - I no longer get any audio recorded. Is there a fix for this? In the meantime I'll go back to the original firmware.

Reply
Roman
02/13/2015 11:36am

Hello, you can do the following firmwares, constant bitrate 18-20-24 MBit

Reply
02/13/2015 11:55am

It's a shame you do not have video stabilizer

Reply
Lee
02/14/2015 5:16pm

I just received my mini806, and am trying to figure it out.
The 1st thing the users guide says os to update the firmware.
I downloaded it, and it's a .bin file.
What do I do with that using windows 8.1?
From what I googled. it sounds like I may need to convert it from .bin --> .ISO ? Doing that requires purchased conversion software?

Can't be this complicated. Am I missing a key point here?

Also, Once I figure out how to "run" the .bin firmware update, how do I install it on the unit? I plugged the unit into my PC via the USB connector, and it did nothing, until I inserted a micro USB card into the unit. Now it comes up as a filesystem (G drive), which is blank since I haven't used it to record yet.
How does this relate to actually installing the firmware???

Are there actual instructions anywhere?
How did you'all figure all this out?

Thx

Reply
Trevor
02/14/2015 6:48pm

It tells you at the bottom of page 3 in the manual how to upgrade

Reply
Lee
02/17/2015 3:08am

Ok got it, thanks.
But just FYI, found those instructions on bottom of page 1, not 3 in mine.
...no clue how I missed it the 1st time.

jun
02/14/2015 8:22pm

I just received my mini 0806 and downloaded the latest "firmware" for it but it won't extract to the root folder of my micro SD card. It shows an error 0x80004005: Unspecified error

Kindly help I just don't know what to do next. Thank you.

Reply
02/17/2015 12:51am

Received my Mini 0806 (second batch) with the latest firmware already installed. Had no GPS function. I reflashed with this firmware anyway. Reset all settings. Confirmed I had the right settings with the distributor, and also the dashcamtalk forums.
Even tried a GPS-base from a Mini 0803. No GPS icon. No GPS LED.

This is my third Mini-product, and so far I have 3 out of 3 being duds. First Mini 0803 just "died" after a couple weeks. Second Mini 0803 overheats, battery burst, has 'glitches' in the video, and locks up randomly.

This is seriously terrible. How do you let this rubbish enter the market?

Reply
whogives
05/16/2015 5:46am

COULD AGREE MORE ....NOTHING BUT PROBLEMS ,HAD 0805 FIRST ONE ..... THEN 0806 KNOW ...... BUT STILL AS BAD. BIG MISTAKE BUYING.... SORRY FOR THE RANT BUT I'M REALLY
ANNOYED, SPENT A LOT OF MONEY ON THIS :(

Reply
Michael
02/17/2015 7:59am

Hi,
When recording my mini makes 3 loud noises and then stops recording, there is a red message that comes up but goes so quick I can't read it. I assumed this was an issue with the formatting of the SD Card however, I have re formatted it again to FAT32 and it still does it. When this does happen I notice that the device is quite hot at the time however, its done it whilst not used for an hour or so after recording for 5 mins.
Getting quite frustrated as the recorded videos are coming up "invalid" on the device too.
Please forward over advice, I have 2 x 128GB cards.

Reply
Lee
02/17/2015 2:26pm

New problem, hopefully someone can help...
I installed the firmware update on my new mini806.
Started using it.
It worked, recorded segments.
Went back to check it about 6 hours later and no longer works.

No longer seems to fully turn on.
THe screen turns on upon either connecting/dissconnecting the usb power cord, or removing/inserting the micro sd card.

But the screen shows a turning circle, as if it's tryign to boot up, and never finidhes. Instead, the screen just turns off, and no button (including power button) turn it on again.
Only thing that makes the screen turn on again is the power cord or micro sd card as stated above.

I tried copying the firmware .bin to the sd card again hoping that would force a reset with re-do of the firmware update, but no go - Just acts the same, with the screen showing a turning circle.

I feel like there's a simple solution of just doing a hard power off and on, but how???
You can not remove the battery with out opening it? I guess that alone is the huge con making this not such a great unit...

I hoped maybe holding the power buttin prolonged would do a hard power off, like on a computer, bot no go on that either.

Last, I thought if I could somehow exhaust the battery, it would hard power off, but kinda difficult to do since it only stays on for a few secs after doing the usb cord or sd card thing (as mentioned above), so it would take a LONG time to get it to the battery's dead.

Any suggestions?

Reply
jun
03/31/2015 5:42pm

try to reset it by pressing ON for 20 seconds

Reply
Lee
02/17/2015 2:33pm

New problem, hopefully someone can help...
I installed the firmware update on my new mini806.
Started using it.
It worked, recorded segments.
Went back to check it about 6 hours later and no longer works.

No longer seems to fully turn on.
THe screen turns on upon either connecting/dissconnecting the usb power cord, or removing/inserting the micro sd card.

But the screen shows a turning circle, as if it's tryign to boot up, and never finidhes. Instead, the screen just turns off, and no button (including power button) turn it on again.
Only thing that makes the screen turn on again is the power cord or micro sd card as stated above.

I tried copying the firmware .bin to the sd card again hoping that would force a reset with re-do of the firmware update, but no go - Just acts the same, with the screen showing a turning circle.

I feel like there's a simple solution of just doing a hard power off and on, but how???
You can not remove the battery with out opening it? I guess that alone is the huge con making this not such a great unit...

I hoped maybe holding the power buttin prolonged would do a hard power off, like on a computer, bot no go on that either.

Last, I thought if I could somehow exhaust the battery, it would hard power off, but kinda difficult to do since it only stays on for a few secs after doing the usb cord or sd card thing (as mentioned above), so it would take a LONG time to get it to the battery's dead.

Any suggestions?

Reply
Lee
02/17/2015 2:52pm

Hard reset/power off?

So installed the firmwardr update.
Unit working fine - but only for about a day, then somehow got into some odd mode where it willn't power up - circle just keeps turning.
Seemed like all it needed was a hard power off (since it wasn't responding to the buttons).

But the battery can't be removed?
Is there maybe a reset boutton?

I fixed it by continually inserting/removing the sd card, which caused the screen to turn on for a few secs, until finally, the battery was 100% dead, and then plugged into the usb power, and it all worked again.

But that's WAY too much work if this happens again.

Must be a way to hard power off?

Thx

Reply
Lee
02/17/2015 2:52pm

Hard reset/power off?

So installed the firmware update.
Unit working fine - but only for about a day, then somehow got into some odd mode where it willn't power up - circle just keeps turning.
Seemed like all it needed was a hard power off (since it wasn't responding to the buttons).

But the battery can't be removed?
Is there maybe a reset boutton?

I fixed it by continually inserting/removing the sd card, which caused the screen to turn on for a few secs, until finally, the battery was 100% dead, and then plugged into the usb power, and it all worked again.

But that's WAY too much work if this happens again.

Reply
Andrew
02/20/2015 3:55am

I have sach problem

Reply
Andrew
02/23/2015 12:06am

Hard reset is done by pressing and holding the power button for 20 seconds

Reply
Lee
02/17/2015 2:54pm

SORRY to all for the repeated posts.

This website kept giving me errors that my post had an error and failed.
So I kept retrying, not realizing the posts did NOT actually fail.

Again SORRY for the spam, i guess it's a mini.com website issue.

Reply
Clyde
02/17/2015 4:21pm

My problem was that the GPS wouldn’t work. I purchased 3 additional GPS mounts so I can switch camera between cars, I got those today and BINGO the GPS work, apparently the problem is in the GPS mount. If you can send me one of those I will return the bad one if you need it.

HOWEVER, there is still a problem… see if you can follow this:
1. Install 32 gig card, records fine.
2. Told to format cards to FAT32….ok with 32 gig card.
3. Camera is supposed to handle up to 128 gig cards.
4. FAT32 format will ONLY work on flash drives up to 32 gig.
5. Have to use exFAT on larger cards. exFAT was invented for Windows VISTA. Apparently your processor won’t work right with it.
6. My problem is, If I have camera set on high resolution, I get a very quick red message flash across the screen and no record.
7. If I turn the resolution down, I can records about 1/8th of the card about 50 3 minute clips then clips show they are recording but are blank.
a. What good is a high def camera if you have to turn down the resolution to work?
b. Others are posting they have the same problem.
8. I don’t think it is a camera problem, I think it is a software problem.

Reply
Keith
02/22/2015 4:42pm

Windows will only format FAT32 up to 32Gb. To format larger cards you need to use a partition manager or a free progam called 'FAT32Formater' available on line.
The 128Gb card needs to be high speed to record a max resolution.

Reply
Byron
07/20/2015 6:21pm

Use guiformat. It worked for me on 64GB cards no problem.

Clyde
02/17/2015 4:21pm

My problem was that the GPS wouldn’t work. I purchased 3 additional GPS mounts so I can switch camera between cars, I got those today and BINGO the GPS work, apparently the problem is in the GPS mount. If you can send me one of those I will return the bad one if you need it.

HOWEVER, there is still a problem… see if you can follow this:
1. Install 32 gig card, records fine.
2. Told to format cards to FAT32….ok with 32 gig card.
3. Camera is supposed to handle up to 128 gig cards.
4. FAT32 format will ONLY work on flash drives up to 32 gig.
5. Have to use exFAT on larger cards. exFAT was invented for Windows VISTA. Apparently your processor won’t work right with it.
6. My problem is, If I have camera set on high resolution, I get a very quick red message flash across the screen and no record.
7. If I turn the resolution down, I can records about 1/8th of the card about 50 3 minute clips then clips show they are recording but are blank.
a. What good is a high def camera if you have to turn down the resolution to work?
b. Others are posting they have the same problem.
8. I don’t think it is a camera problem, I think it is a software problem.

Reply
Clyde
02/17/2015 4:21pm

My problem was that the GPS wouldn’t work. I purchased 3 additional GPS mounts so I can switch camera between cars, I got those today and BINGO the GPS work, apparently the problem is in the GPS mount. If you can send me one of those I will return the bad one if you need it.

HOWEVER, there is still a problem… see if you can follow this:
1. Install 32 gig card, records fine.
2. Told to format cards to FAT32….ok with 32 gig card.
3. Camera is supposed to handle up to 128 gig cards.
4. FAT32 format will ONLY work on flash drives up to 32 gig.
5. Have to use exFAT on larger cards. exFAT was invented for Windows VISTA. Apparently your processor won’t work right with it.
6. My problem is, If I have camera set on high resolution, I get a very quick red message flash across the screen and no record.
7. If I turn the resolution down, I can records about 1/8th of the card about 50 3 minute clips then clips show they are recording but are blank.
a. What good is a high def camera if you have to turn down the resolution to work?
b. Others are posting they have the same problem.
8. I don’t think it is a camera problem, I think it is a software problem.

Reply
Clyde
02/18/2015 11:35am

Works GREAT, just like it is suppose to. Have to use 32 gig card formatted to Fat32, new gps mount so gps works and all seems right for now. I will check back in a couple of weeks....now to figure out what to do with the 2 128gig cards I bought for this that was suppose to work but don't.

Reply
02/18/2015 11:36am

Is there a way that you could change this cam so that if needed I could have a option to back up card A to Card B instead of auto overwrite? If i ever had to turn this card over to the police this option would be a huge plus!

Reply
Alex
02/19/2015 11:59am

power indicator does not light when external power input and dvr is turned off. so we cannot see is battery still charging or stopped charging.

Reply
CD
02/19/2015 12:10pm

Any chance of some feedback about our problems that we are reporting please.

Reply
Clyde
02/19/2015 1:32pm

when is the next filmware update coming

Reply
Clyde Underwood
02/19/2015 5:10pm

Reply
Neil Lowery
02/24/2015 8:18pm

I too am struggling to update firmware...I have followed instructions on page 1 but it does not update automatically. Maybe my firmware version is uptodate? I HAVE 0806 FW 20150128 V1.0. Can someone please confirm this for me.

If not what other process can be followed to update the firmware! ie what free software is available to open the bin file?

Anyvhelpmgreatly appreciated


Thanks

Reply
Keith
02/25/2015 2:22am

Hi Neil,
If you look at the top of this thread then you will see that you are using the latest version available dated 20150128.

Reply
Nick Bennett
02/25/2015 4:22pm

I have just purchased a 0806 dash cam but unfortunately I am receiving an error message: "card size limit for video recording" I can record photos from the dash cam but no video. I am using a 2Gb micro SD card as a test but will use my128Gb card whenit is installed in the car.

Regards

Nick

Reply
07/31/2015 10:02pm

this is my second cam ist got so heated it was a fire hazzard replacement records but unable to view on pc or mac or tv with hdmi had it hard wired to a lexus cost 600 dollars & a toy that is not usable don't hard wire or glue the winshield waste of time money & energy sounds great but a dud with no real people to answer calls cp

Reply
10/05/2016 7:32am

loveit

Leo-uk
02/26/2015 9:26am

Heres a link that might solve some issues you are having with cards over 32GB. Apparently what I gather from forums is that the standard Windows formatting programme only works on cards up to 32GB. I know that the 0806 will format your micro SD cards (not sure of the max the size) but from the forums I gather that it is always better to format any cards with non windows formatter. Hope this works but you have nothing to loose by trying.

https://www.sdcard.org/downloads/formatter_4/

Reply
Nick Bennett
02/27/2015 1:23pm

Thanks Leo-uk for the formatting software link. In the end I discovered there is a minimum size limit for the SD card of 8Gb hence my test with a 2Gb card not working. My 128Gb card turned up today. It was formatted using 'exfat' and predictably the dash cam didn't like it but I just formatted it on the camera and it now runs perfectly.

Reply
Andyvee
02/27/2015 1:08pm

Hi, some initial feedback after spending the last 6 months using a Mobius action cam as a dash cam. One option I am missing is to dim or even disable the status LEDs, they are quite bright at night and an option for dim LEDs in the menus would be good.

Reply
Nick Bennett
02/27/2015 1:22pm

Thanks Leo-uk for the formatting software link. In the end I discovered there is a minimum size limit for the SD card of 8Gb hence my test with a 2Gb card not working. My 128Gb card turned up today. It was formatted using 'exfat' and predictably the dash cam didn't like it but I just formatted it on the camera and it now runs perfectly. A previous SanDisk 128Gb card I had purchased from China was a fake and I think the proliferation of counterfeit cards on eBay maybe the cause of some peoples issues with the dash cam. I recommend a simple SD card checking programme called: "h2testw". This will confirm if you have a defective card.

Reply
Nick Bennett
02/27/2015 1:23pm

A previous SanDisk 128Gb card I had purchased from China was a fake and I think the proliferation of counterfeit cards on eBay maybe the cause of some peoples issues with the dash cam. I recommend a simple SD card checking programme called: "h2testw". This will confirm if you have a defective card.

Reply
BSomany
03/03/2015 9:24am

Hello!
The time zone setting has only 1 hour multiples and effectively eliminates the possibility to configure correct time of UTC+05:30 in India.

There also seem to be random memory corruption where everything appears to work properly and the red led continues to glow, but the video is not recorded despite using a high speed card. At times the video is recorded but the file is corrupt and does not play back. (Triple checked the card with other data from a computer with no problems at all).

There are some random alarms of storage IO errors at times.

Any solutions?

Thanks.

Reply
kwplee
03/05/2015 4:10pm

Firstly, I have the exactly same issue of the dash cam. At first I used 2x 128gb 30mb/s cards (tried all different formats and cluster sizes, FAT32, exFAT, Ext2, Ext3) on the mini 0806. The video files are unreadable or black screen with sound only. Then I tried Samsung EVO 2x64gb card 48mb/s faster card; the issue still persists without any improvement. I even lowered the video resolutions without any success.

Secondly, the time does change itself no matter what time zone I set up. The worst experience is when I set the time 14:00 and next day found the time reverse 12 hours early itself (became 02:00 at afternoon, not 14:00). The dash cam changes its time 1 hour backward usually every day after I adjusted a correct time. Hopeless!

My mini 0806 came with the newest 20150128 firmware but it is unable to record a proper video. Finally, does anyone know what the 3 chimes warning sound (it happens at least once a day or more in a day) meaning of this problematic brand dash cam?

Reply
Andyvee
03/03/2015 1:29pm

Any news when the parking guard mount will be available? This was one of the main reasons I bought this dashcam and I can't find anywhere that sells the parking guard mount, including aliexpress which normally has things first.

Reply
MARK PLATT
03/11/2015 4:42am

I have just purchased my cam I'm having problems connecting to GPS it wont connect automatically I have gps on and all settings correct. The only way it connects is if I go through all the settings again not altering anything but just go through the motion, It connects to GPS with no issues. But that is a pain and not what I want to do at the start of every journey. My journey to work is between 50 to 60 minutes every day the whole journey it will not connect to GPS. As stated the only way it connects is going through the settings. HELP or advise please. Have I got a faulty unit. It has the latest software upto date version.

Reply
Andrew
03/11/2015 5:26am

The problem is inside the mini0806. Poor quality assembly.
I disassembled the device. It was torn the wire from the contact pad to the pcb. Soldering and it worked. I have photo defect

Reply
David
03/15/2015 9:14pm

Sorry I purchased this camera. Nothing but problems after the update. You have to be a computer genius to figure out the fix to what seems to be a big problem. Wow, I will return and wait for my money back.

Reply
03/24/2015 4:43am

Using this camera for a month, work 100%. Excellent video quality and sound. Parking sensor is nice feature.

One small issue : Because I use parking sensor, When I enter the car the parking feature start the cam but during the short period I start the car, it shut down even when it see the car power on. It return to operation only if a bump in the road activate the camera. If I enter the car and parking mode did not trigger - everything is ok.
Maybe something to fix on next revision...

Overall - 100% happy with the 0806!

Reply
John
04/13/2015 7:05pm

Not happy with mini 0806 camera. Battery dies suddenly when direct power is removed, setting do not remain and are always returned to default, time has to be constantly updated and does not sync with gps time, device has problem recognising sd card bigger than 64gb. This device is supposed to use a maximum of 256gb. Overall poor firmware and this is with the upgrade and unit is very overpriced.

Reply
CD
04/16/2015 10:16pm

QUOTE FROM TOP OF PAGE
"We scheduled to update the mini0806 firmware on every Friday."
NEARLY 3 MONTHS LATER AND NOTHING.
GUESSING YOU CLOWNS DO NOT KNOW HOW TO FIX THE PROBLEMS THESE EXPENSIVE POS CAMERAS ARE EXPERIENCING, AND YOU CANNOT EVEN BE ARSED TO GIVE US ANY UPDATES ABOUT YOUR PROGRESS OR LACK OF! ALSO PRESUME THE GOOD REVIEWS THESE CAMERAS ARE GETTING ARE WRITTEN BY YOURSELVES AS WELL...

Reply
Alexander
04/18/2015 8:10pm

Hi, usually after work one hours cam do not turn off when i turn off key ignition or disconnect the power cord. Blue LED always lights until the battery is discharged. Parking mode and motion sensor disabled. Hard reset and update firmware i did.

Reply
Don S
04/25/2015 11:47pm

Hi
Looks like the company folded as there is not even a whisper coming to customers.
After the major fiasco with the locked up units, and the overly complex suggested fix, everyone must have been fired.
Guess I will have to find a more reliable product and company.

Reply
thomas Ordon
06/08/2015 2:46pm

after update to tlatest one the blue led does not come on at all. i didnt look before updateing as it was brand new out of box..
is it bad firmware or bad flash or just broken 806

Reply
07/31/2015 10:20pm

the ammount of money poured into a bad product advertised by amazon has decreased my trust in amazon will purchase big ticket items locally amazon sells trash the vendors banished the micro sd 128 sold by amazon other options are false statements I am wondering how to get that stuff of my winshield it is a leased lexus cliff perera

Reply
Cliff H
09/22/2015 11:56am

I received the 806 from Amazon 4 days ago. So far I'm not impressed to say the least. The GPS doesn't work. AUTO setting for A card and B card doesn't work.
But the most irritating thing about this is everyone on here is having problems but no one from this website mini0806.com is replying. I have a feeling this bulls**t website, including the manufacturers, are in China!

Reply
Regina Hart
09/26/2015 11:35am

Purchased the mini 806, installed a week ago. Everything seems to be working great EXCEPT for the viewer that came with the camera. The videos load ok but the GPS data, although clearly stamped on the video...will not load in the "GPS map" on the right of the viewer. I have a screen shot showing the error message that I get every time I load a video. It's strange because in the Dashcam Viewer software, the GPS data loads fine but that player won't load the video. Can you help with that? I can submit the screen shot if you give me a location to submit it to.

Reply
Stewart
11/18/2015 9:45pm

I just purchased this mini 0806 and it worked fine on the first use in the car, but on the second use it didnt boot up and the blue and red light come on but nothing else is working. when removed from power supply the red light stays on, although there is still some residual power in the unit indicated by the red light staying on when the unit is unplugged there is still no other functions... cheap shit

Reply
Thomas. Ordon
11/18/2015 10:09pm

This thing is garbage do not order it

Reply

We do possess excellent technicians and talented expertise in order to provide amicable services to our customers.

Reply
Thomas. Ordon
12/09/2015 7:37pm

no you dont. and your enginers SUCK>> my home thermal equiment showed this thing to overheat and be unsafe. i say a CLASS ACTION LAW SUIT>>i have the proof.

Reply
Thomas. Ordon
12/09/2015 7:37pm

no you dont. and your enginers are dumb as rocks
my home thermal equiment showed this thing to overheat and be unsafe. i say a CLASS ACTION LAW SUIT>>i have the proof.

Reply
TLO
12/09/2015 7:38pm

no you dont. and your enginers are dumb as rocks
my home thermal equiment showed this thing to overheat and be unsafe. i say a CLASS ACTION LAW SUIT>>i have the proof.

Reply
Thomas Ordon
12/09/2015 7:36pm

THIS THING SUCKS DO NOT BUY

Reply
01/09/2016 2:44am

I find it very good that US Ambassador to Zambia Eric Shultz and his team visited Zikomo Safari Camp because it is important to see that nationality lifestyle and beautiful nature, of course. Custom writing is also very interesting.

Reply
Chris
01/13/2016 4:25am

Hi. I have bought several 0806's which have had battery issues and after installing a replacement battery in the latest one it refuses to boot. Is there any way to recover a unit that just has solid blue and green LED's (the screen does not turn on)?

Reply
JP
02/02/2016 9:49pm

I installed the newest firmware. There is always no sound on my recordings. What do I need to do? Please help. Thanks!

Reply
Bill
03/04/2016 7:41am

I am using 0805 and everything was fine (after spending weeks trying to find the spec online). So, it seems when the Micro SD got full the 0805 stopped recording until I deleted all videos. Any of you knows why? The SD is not protected and the files (videos) are not locked.

Reply
04/07/2016 8:31am

Want it tomorrow, April 8? Order within 6 hrs 43 mins and choose One-Day Shipping at checkout.

Reply
04/07/2016 12:40pm

Looking for affordable essay writing service? Buy cheap essays online from our professional essay writers.

Reply
Thien Tran
04/15/2016 2:39pm

I used this for 1 year. Now the battery is dead. When I turn off the car, it shuts down right away without " good bye sound". So it can't save the last file.
Now It has 1 more issue. It keeps restart after a few minutes , and doesn't save the file before restart.
How can I fix it ?

Reply
Lee Birnbaum
08/01/2016 12:03am

You can order a replacement battery on ebay or amazon.

The battery # is : 042030

Because I live in a hot area (Texas), I need to change out the battery monthly, because the heat kills it so I buy them cheaper in bulk.
For example:
http://www.ebay.com/itm/5-pcs-3-7V-200mAh-Li-polymer-Rechargeable-Battery-Li-Po-ion-402030-for-bluetooth-/261406842914?hash=item3cdd0fe022:g:Au4AAOxyni9TCrZG

You will need to search google and youtube for instructions on how to open the unit, as it's really not meant for the user to open it, and can be a little tricky the 1st time.
...Mainly, you have to rotate the the side circle (which is how you rotate the unite up and down when mounted) in the proper position, then use a small flat screw driver to un-snap the 2 click barces that hold it on.
You also want to be careful not to loose the steal ball bearing that's used for the "clicking" when you rotate the unit up and down.
I lost mine the 1st time, and coldn't find it, so my unit no longer "clicks" when rotated ...not that it matters much. Still holds it's position and works...

As for the restart issue... I had a similar problem due to the mount wearing out, and thus not making a solid connection.
Well, not really wearing out, but more, the Texas heat seemed to soften the plastic, making it looser fitting that it is supposed to be.
To at least temporarily resolve the issue, I plugged the micro USB power cord directly into the mini0806, instead of to the mount (which means you're bypassing the GPS features).

It could also be a problem with the power cord it self, such as the USB connector.
You can also try using a different micro USB power supply (such as one for your phone) and see if that resolves the issue.

Also note that I hadn't realized mine was "flickering" on and off du to the mount issue until the battery died, because if it has a working battery, then a quick glitch in the power supply willn't be noticed.

However, if the battery is totally shot, then even a quick flicker of power will result in it shutting off, and then rebooting a split second later when power is restored again.


Best of luck
-Lee

Reply
Lee Birnbaum
08/01/2016 12:03am

You can order a replacement battery on ebay or amazon.

The battery # is : 042030

Because I live in a hot area (Texas), I need to change out the battery monthly, because the heat kills it so I buy them cheaper in bulk.
For example:
http://www.ebay.com/itm/5-pcs-3-7V-200mAh-Li-polymer-Rechargeable-Battery-Li-Po-ion-402030-for-bluetooth-/261406842914?hash=item3cdd0fe022:g:Au4AAOxyni9TCrZG

You will need to search google and youtube for instructions on how to open the unit, as it's really not meant for the user to open it, and can be a little tricky the 1st time.
...Mainly, you have to rotate the the side circle (which is how you rotate the unite up and down when mounted) in the proper position, then use a small flat screw driver to un-snap the 2 click barces that hold it on.
You also want to be careful not to loose the steal ball bearing that's used for the "clicking" when you rotate the unit up and down.
I lost mine the 1st time, and coldn't find it, so my unit no longer "clicks" when rotated ...not that it matters much. Still holds it's position and works...

As for the restart issue... I had a similar problem due to the mount wearing out, and thus not making a solid connection.
Well, not really wearing out, but more, the Texas heat seemed to soften the plastic, making it looser fitting that it is supposed to be.
To at least temporarily resolve the issue, I plugged the micro USB power cord directly into the mini0806, instead of to the mount (which means you're bypassing the GPS features).

It could also be a problem with the power cord it self, such as the USB connector.
You can also try using a different micro USB power supply (such as one for your phone) and see if that resolves the issue.

Also note that I hadn't realized mine was "flickering" on and off du to the mount issue until the battery died, because if it has a working battery, then a quick glitch in the power supply willn't be noticed.

However, if the battery is totally shot, then even a quick flicker of power will result in it shutting off, and then rebooting a split second later when power is restored again.


Best of luck
-Lee

Reply
Lee Birnbaum
08/01/2016 12:04am

You can order a replacement battery on ebay or amazon.

The battery # is : 042030
Just do a search on ebay and you will see many come up.

You will need to search google and youtube for instructions on how to open the unit, as it's really not meant for the user to open it, and can be a little tricky the 1st time.
...Mainly, you have to rotate the the side circle (which is how you rotate the unite up and down when mounted) in the proper position, then use a small flat screw driver to un-snap the 2 click barces that hold it on.
You also want to be careful not to loose the steal ball bearing that's used for the "clicking" when you rotate the unit up and down.
I lost mine the 1st time, and coldn't find it, so my unit no longer "clicks" when rotated ...not that it matters much. Still holds it's position and works...

As for the restart issue... I had a similar problem due to the mount wearing out, and thus not making a solid connection.
Well, not really wearing out, but more, the Texas heat seemed to soften the plastic, making it looser fitting that it is supposed to be.
To at least temporarily resolve the issue, I plugged the micro USB power cord directly into the mini0806, instead of to the mount (which means you're bypassing the GPS features).

It could also be a problem with the power cord it self, such as the USB connector.
You can also try using a different micro USB power supply (such as one for your phone) and see if that resolves the issue.

Also note that I hadn't realized mine was "flickering" on and off du to the mount issue until the battery died, because if it has a working battery, then a quick glitch in the power supply willn't be noticed.

However, if the battery is totally shot, then even a quick flicker of power will result in it shutting off, and then rebooting a split second later when power is restored again.


Best of luck
-Lee

Reply
Lee Birnbaum
08/01/2016 12:07am

I have wrote a detailed reply on where to buy, and how to change the battery, plus thoughts on your restrting issue, but keep getting an error from the server when I click "Submit" with no explaination why.

Maybe post was too long, so instead, here's my email.
If you still want information on this subject, drop me an email with your return email, and I'll send it to you...

-Lee


Reply
Lee Birnbaum
08/01/2016 12:09am

Replied with information, but get error.
Maybe my post too long?

Not sure how to post the details of the battery and such...

Or you can email me at LeeBirnbaum@gmail.com

Reply
Lee Birnbaum
08/01/2016 12:09am

Replied with information, but get error.
Maybe my post too long?

Not sure how to post the details of the battery and such...

Reply
Lee Birnbaum
08/01/2016 12:11am

Oops !

I now see that inspite of the error, every "failed" reply attempt actually DID post.

Sorry for all the repeated posts...
Please just read the 1st one, which is the complete one.

THanks
-Lee

Reply
04/19/2016 1:07pm

Leave an order: and we will contact you as soon as possible. Our team consists of professional and experienced writers only.

Reply
05/19/2016 11:18pm

It's wonderful you have update it.thank you.I found this is an insightful and also appealing post.

Reply
06/14/2016 2:43am

I am always searching online for articles that can help me. There is obviously a lot to know about this. I think you made some good points in Features also. Keep working, great job!

Reply
07/31/2016 10:34pm

wooden pendrives with engraving or printed your logo

Reply
10/25/2016 11:15am

amazing info thanks for sharing keep it up

Reply

I loved the way you discuss the topic great work thanks for the share.

Reply
01/13/2017 3:28am

I'm getting excited about this kind of beneficial information of your stuff in the future

Reply
01/13/2017 4:14am

They are not able to finish the writing assignments on time. For some students, writing any writing assignments is able to waste their time

Reply

This is really a great stuff for sharing. Thanks for sharing.

Reply
02/07/2017 2:36pm

thanks for sharing this blog

Reply
02/13/2017 12:57am

Reply
02/25/2017 2:16am

If you use a wireless connection, or if you have more than one computer, you will need a router. Properly configuring your router is a crucial step in using the Internet safely and securely.

Reply
03/20/2017 4:35am

It become an attractive part of a blog when author uses indirect speech while writing a blog. It shows your creative mind as well as make your written essay different from others.

Reply
03/20/2017 5:10am

The writer of this blog is really very professional. Every single line of this article is well written. New use of vocabulary is a great effort. At the same time tense, indirect speech was also sued in good manner.

Reply
03/20/2017 9:38pm

The method of execution is really impressive of writers of this blog. This team does really work hard and brings new information to its readers. I am connected with this blog very long and I am really thankful.

Reply
03/20/2017 10:20pm

Detailed and descriptive articles written in this blog is really very helpful for me as well as for other who seeking such kind of knowledge. It is definitely going to become useful in coming future.

Reply
03/21/2017 3:48am

Here in this blog, words themselves are creating that scenario where there is a lot of mayhem and serendipity along with a silent isolation. Rarely found to see such skill and enthusiasm.

Reply
03/21/2017 5:30am

I am glad that I saw this post. It is informative blog for us and we need this type of blog thanks for share this blog, Keep posting such instructional blogs and I am looking forward for your future posts.

Reply
03/22/2017 5:11am

It verbalizes a limitless imagination. I am totally impressed with the factual transformation skill of author used for transforming his thoughts and presented here. Impressed with deep meaning of this article.

Reply
03/22/2017 7:42am

Wow! This is the perfect blog I am looking this type of blog its awesome blog here , share great information about this topic. This informative blog helps many readers with their decision-making regarding the situation. Great articles and will look forward for more!

Reply
03/22/2017 10:31pm

I read your post and specially about the food, I really appreciate your post, thanks for sharing this amazing post with us and please keep sharing this type of post.

Reply
03/22/2017 10:47pm

Graceful written content on this blog is really useful for everyone same as I got to know. Difficult to locate relevant and useful informative blog as I found this one to get more knowledge but this is really a nice one.

Reply
04/08/2017 3:12am

Reply

Verify those Polaroid is in the build Furthermore you supply force of the build. After turning it on, watch to the squinting green headed. At it stops blinking, the GPS need created a fix. It could detract anyplace from 30 seconds should 8 minutes to it with stop squinting.

Reply
04/12/2017 2:29pm

Following turning it on, watch of the squinting green headed. During it stops blinking, the GPS compelling reason made An settle. It Might degrade anywhere from 30 seconds ought to 8 minutes to it for prevent squinting.

Reply

It verbalizes a limitless imagination. I am totally impressed with the factual transformation skill of author used for transforming his thoughts and presented here. Impressed with deep meaning of this article.

Reply

Enthusiastic words written in this blog helped me to enhance my skills as well as helped me to know how I can help myself on my own. I am really glad to come at this platform.

Reply
05/17/2017 11:35pm

I appreciate this blog to share knowledge about this important topic. Here I found different segments and now I am going to use these new tips with new enthusiasm.

Reply
05/18/2017 12:05am

It become an attractive part of a blog when author uses indirect speech while writing a blog. It shows your creative mind as well as make your written essay different from others.

Reply
05/18/2017 9:03am

It’s going to be ending of mine day, but before ending I am reading this fantastic piece of writing to improve my knowledge.

Reply
05/18/2017 9:06pm

Professionally written blogs are rare to find, however I appreciate all the points mentioned here. I also want to include some other writing skills which everyone must aware of.

Reply
05/18/2017 9:49pm

Happy to found this blog. I have some facts related to this blog and I would like to share with all its readers. Definitely it is going to help everyone and aware people with some more knowledgeable points.

Reply
05/28/2017 5:02pm

Nothing to say but great web! I can get so many things from here. Thank you.

Reply
06/07/2017 2:16am

Reply
07/12/2017 8:56am

Best Quickbooks Support Number, Quickbooks Help, Quickbooks Support, Quickbooks Support Number, Quickbooks Support Phone Number, Quickbooks Tech Support Number, Quickbooks Tech Support Phone Number, Quickbooks Technical Support Number, Quickbooks Technical Support Phone Number, Quickbooks Customer Support Number, More info visit :- www.quickbooksaccountingsolution.com

Reply
07/12/2017 9:12am

Best Quicken Support Number, Quicken Help, Quicken Support, Quicken Support Number, Quicken Support Phone Number, Quicken Tech Support Number, Quicken Tech Support Phone Number, Quicken Technical Support Number, Quicken Technical Support Phone Number, Quicken Customer Support Number, More info visit :- www.quickenaccountingsolution.com

Reply
07/12/2017 9:16am

Best Sage Support Number, Sage Help, Sage Support, Sage Support Number, Sage Support Phone Number, Sage Tech Support Number, Sage Tech Support Phone Number, Sage Technical Support Number, Sage Technical Support Phone Number, Sage Customer Support Number, More info visit :- www.sageaccountingsolution.com

Reply

It’s going to be ending of mine day, but before ending I am reading this fantastic piece of writing to improve my knowledge.

Reply

wonderful info thanks

Reply
07/14/2017 10:17am

I Really like this post very informative and knowledgeable thanks for the great post.

Reply
07/14/2017 3:17pm

I read your whole blog, Your work is really good and inseparable, Thanks for sharing.

Reply

Incredible points. Sound arguments. Keep up the great work.Thanks for sharing in detail. Your blog is an inspiration! Apart of really useful tips, it's just really!

Reply
08/11/2017 12:58pm

Pretty cool post. It’s truly very nice and beneficial post.Thanks for sharing this with us!it is my first stop by.

Reply



Leave a Reply